Brushers Premium Synthetic Enamel achieves superior finish & best opacity due to its advanced filling technology. High adhesion and better DOI levels and gloss.

Key Features

Good Adhesion
Superior Finish
High Opacity
Glossy

Application

Use Brush, Roller, Spray
Number of Coats 2 [Essential 3 coats for yellow]
Flash-off time 3-4 Hours
Mixing Raio 5:1

Usage

  • Apply with brush, roller or spray
  • Preparation: Remove all loose particles with wire brush, and ensure the substrate is free from dirt, grease and paint flakes before application.
  • Priming : Apply one coat of Red oxide metal primer or Zinc Oxide
  • Coloring: Thin 1 liter Brushers Synthetic Enamel with 100 ml thinner, and apply with brush or roller, allow to dry for 6 hours after application of one coat

Safety Instructions

  • Fall protections are recommended for applicators working on high-rises, proper respiratory masks while sanding or application.
  • Keep out of reach of children and recommending distance from food, drinks and animal feed.
  • Try not to smell or breath paint material or fumes.
  • Avoid contact with skin or eyes, wash/rinse immediately if contact with skin/eyes with plenty of warm or cold water.
  • DO not empty into drain, and refer to government regulations to dispose the residues. Clean brush only after removing paint from brush.
  • Storing food in empty can not advisable.

Contact Us

  •   +91 9824839440, 9966465616
  •   info@impko.co.in
  •   Gorwa, GIDC, Vadodara, Gujarat

Follow Us: